(Texas) | November 26th, 2018
A few months ago I changed out the original amber front side markers to the clear LED version from Suncoast. These clear side markers looked great on my Aqua Blue 911 4S. With this change all the lights on the front are clear so I swapped out the original rear lights. The look is fantastic, it changes the entire look of the car. I have the 4S, so there is light bar bridging the rear lights. The lights fit perfectly and are amazing when they are illuminated. To remove the lights is pretty easy, you raise the spoiler, remove a plastic cover plate located above each light, the mounting screws are located beneath the plate. Remove the screws, count the number of turns to remove, pull out the light and remove the electrical connector. Install the new clear light, re connect the electrical connector, replace the screws using the same number of turns. These screws are used to secure the lights and facilitate alignment to the body panels. So itâ€™s no big issue of you miss count a screw turn, just play around with the screws until you get the gaps the same. As I have a 4S replacing the bridging light bar was a bit more involved due to getting access to the mounting bolts, so I had the dealer fit this, it took them 30 minutes..
(St. Louis, MO) | January 28th, 2018
I ordered and installed this kit on my white Carrera. Reasonable price and easy installation. It gave the car a totally different look.
(Northj Haven, CT) | October 30th, 2016
Great price on a genuine Porsche part. Great look on my jet black metallic Carerra. $225 less than my local dealer. Easy instillation. Note: count the turns on the installation screws and repeat on the new tail light assemblies before installing.
(Oklahoma City, OK) | July 5th, 2016
Very well packaged and takes less than 30 minutes to install. I put these on a 2016 GTS with the "duckbill" rear spoiler. Remove the 2 bolts, slide the spoiler forward to get access to the 2 bolts for the lights. When removing the stock lights, make note of the thread count where the bolts screw into, they will move when rethreading the bolts back in. If you don't match then your gaps will be off when you reinstall. My fix was to snug the back bolt first, this will help the front bolt from spinning.
(St. Louis) | May 19th, 2016
Very easy to install, 2 bolts and 1 plug each side. My 991 is Platinum Silver and the clear lights look great on this color.
(Atlanta) | May 7th, 2016
Amazing difference...car should have come this way originally. On Carrara White GTS.