Skip navigation and go to content.
My Cart: 0 item(s)


Purchase Clear Side Marker Light Set (987)
  • Clear Side Marker Light Set (987) SKU: 987Sides

    ★★★★★ ★★★★★ 5.00/5 Stars. (14 Reviews)
  • MSRP $57.82 $44.95

  • Model:
  •  

Remove those old ORANGE side markers!! This is a complete set of factory clear side markers, please select your model. These will install in seconds, and come with the correct amber bulbs. These are Porsche Original equipment on European cars! Installation is simple.

Fitment: 2005-2012 All Boxster or Cayman models, all versions.

★★★★★ ★★★★★
5.00/5 Stars out of 14 Reviews
5
14
4
0
3
0
2
0
1
0
Pages 1   2
A very simple aesthetic upgrade.
(Long Island, NY) | December 29th, 2019
Took a few minutes to pop out the old marker and pop in the new and I think made a difference in appearance, particularly on my Artic Silver 987. One of the more simple aesthetic upgrades.
So simple, the clear lights are PERFECT!
(Texas) | December 9th, 2017
Today I replaced my amber markers after watching a review on utube. The difference in vehicle appearance is very impressive. My Silver Boxster lines look for improved with the new markers. I would recommend this change to all 987 owners.
Why did I wait so long?
(Salt Lake City) | October 24th, 2016
I love the updated look and the quality of these clear side marker lights. Thank you Suncoast!
clear side markers for Cayman S
| July 13th, 2016
Excellent service. Ample instructions available on YouTube.
Clear markers
(Sterling Heights, MI) | July 11th, 2016
Sharp lens. Won't comment on the visuals, it does show a amber bulb behind so you have what they call the egg yolk appearance. Some folks buy a bulb that flashes yellow but appears clear when turned off. If you do this, read enough reviews until you find a story about the bulb coating coming off. This does happen and it leaves a mess, so I stuck with the amber bulbs that were included. What I will say is that the instructions generally available claim you can just pull out your lens from the wheel well side of the lens, but in my case, that bent the retaining clips backwards. They had enough life to bend them back but upon reseating the lamp, they rattled. So I had to play with the retainer to get them to set again. There is actually a hole in the wheel well where you can insert a tool to compress these. It's smarter and the right thing to do, so if you find and instructional video suggesting you pop them out, I'd look around more. I didn't tear the bumper but I was afraid I could. On the back on the wire harness that plugs into the lamp, there is a rubber cover for sealing the elements. I dropped this down the hole when the lens was out. I had to remove a dozen screws and bend the bumper out to reach where it had fallen. Remove very slowly - if you brush the opening with the part, it pops off easily. Avoid dropping the part and save yourself some time. Nothing wrong with the part, just poor direction around the internet on how to remove/replace.
Very classy!
| June 28th, 2016
Transforms front to a clean, classy look in just 5 minutes!
Clear Side Marker Light Set
(Austin TX) | June 23rd, 2016
Super easy install and looks great. DIY and takes 2 minutes tops.
Great and inexpensive upgrade
(San Jose, CA) | April 25th, 2016
I have an arctic silver Porsche Boxster 2005 and these clear side markers match the look and color of my car a lot more than an orange sidemarker. Very easy and inexpensive upgrade as long as you can take out your current side markers. If you've never done it before, then just ask Suncoastparts.com for a video link. I'll just try to post directions and hopefully it'll make sense for people who don't know how to take out their side markers. For the 987.1 models (Porsche Boxster 2005 here), then just push the side marker in and out. Push in the direction from front of the car to the back of the car. You'll start to see the side marker's back edge pull away from the frame of the body, take a flat head screw driver and just pry the side marker towards you (away from the wheel/frame) and the side marker should pop right now. You'll now have the side marker out of the car but attached with a wire. If you take a look at the side marker and wire, where it attaches, you'll see a metal prong holding the wire connection to the side marker. Just push down on the metal prong and pull out the wire. You'll then switch out the current side marker with the clear side marker and connect the wire. The metal prong will automatically pop back up to hold the connection together. Put the side marker back into the frame of the car. You can do this by inserting the side of the clear markers that faces the front of the car first, then push the rest of the side marker into the frame of the car. That's it. Hopefully this helps someone thinking of making this upgrade. It only takes a couple minutes total for the replacement.
Like they were factory installed
(Phoenix, Arizona) | April 22nd, 2016
The lights were easy to install and they give my car a newer look. Very satisfied with the purchase.
Much better!
(Seattle WA) | April 19th, 2016
Couldn't be easier to install and is a much nicer look than the amber. Sure everyone says you have to do this if you are an aficionado, but it really is nicer.
 

Review this Item

Clear Side Marker Light Set (987)
Click the stars to rate. 5 stars is the best.
All fields are required except "where you're from".
Your email is for verification purposes only and will NOT be published or shared. See our Privacy Policy. Thank you for your review!