SKU:

Very easy to install. The car should have been like this from factory.

Installed myself in about 2 hours. More time spent in being careful with interior panels removal and set up of unit before installing (cables and brackets). Added backup camera with a a Fakra to RCA cable and adding a 12v wire to trigger pin 6 as outlined on many videos. No issues with install. Plug and Play. Looks absolutely factory. No regrets. Very fast shipping. Installed in a 2006 987 Boxster, base.

Did not consider a 996 until this head unit came out. Bought the car and ordered the head unit, the double din bracket and support. No cutting or modifing needed, just plug and play. Bose speakers sound great with the head unit. So happy to now have Apple CarPlay with my music and map apps for long drives. Asthetecally looks perfect. I got rid of the CD caddy and also ordered an upper storage shelf to place hvac controls at the very bottom. I placed the USB box in the glove box. Length of cable was perfect for that No need to cut a hole anywhere to run the wire and no loss of storage in the storage shelf. Inside the glove box there are already two holes in the roof which allow for the USB box cable to be ran through one and another cable of your choice out the other for iPhone/usbc/aux.. Thank you for having it all in one place and at the best price I could find.

Will these fit a 2015 Targe 4?

Excellent product. Installed in less than hour. All you need is a rivet gun and the plastic tools to remove the moulding . They are available at any auto parts store.

I bought the front trunk liner for the 2024 Taycan but it clearly would not fit even with the upper lids removed. Truth be told, I bought mine directly from Porsche not Suncoast but the photograph is the same as in the Porsche website so I suspect the product is identical. It probably fits other years models just not the 2024 Taycan 4S. It was promptly sent back to Porsche.

These are an easy install. You'll just need to remove the original mounting bracket and install them onto these, but it is literally one Phillips screw, plus two Torx on each side. Being very careful and cleaning behind the old lights took me maybe 30 minutes total. They look great and are an understated modification that was an OEM orderable option on the 997. Unfortunately, my original driver's side tail light was broken at the front mounting tab somehow, so this was a functional purchase for me too!

Perfect piece for my prized possession. I had to replace my gas cap as the rubber leash that attaches gas cap and car broke. Very simple to install took less than two minutes.

Purchased this as replacement for original gasket on a 2004 996 Carrera coupe. Fit perfect but follow these steps to ensure proper install. Mark separation point of old gasket. Use tape or clamp to hold down front wind deflector panel. Remove old one & note which side is the bottom that grips the flange around sun roof. Carefully install little by little using a wide 90 degree trim tool. Make sure lower slot on gasket seats snugly and flush with top of surrounding area. Work your way from the passenger side to the drivers side until end of gasket meets origination point. Go around perimeter with fingers to ensure snug fit. That’s it & your done.

I refuse to spend 5+k minimum for a new exhaust. This modification does everything I need by keeping the restrictive 992 valves open. Great low RPM sound. Best money I have spent on the GT3.