Skip navigation and go to content.
My Cart: 0 item(s)


Purchase Trailer Brake Controller Adapter
  • Trailer Brake Controller Adapter SKU: PK955PLUG

    ★★★★★ ★★★★★ 5/5 Stars. (4 Reviews)
  • $49.95

  •  


A Cayenne (2003-2018) or Macan with the factory trailer kit is prewired for a trailer brake controller. To use the brake controller, this kit will add the correct quick-connect plug to activate a trailer brake controller.

Cayenne with optional equipment no. 1D6 will come with a Trailer hitch receiver and wiring up to the receiver hitch that includes a control unit to operate the trailer parking lights, turn signals and brake lights. The Cayenne is also pre-wired for a brake controller.  You will need to do the following to hook up the trailer electrics and/or an electric brake controller:

> Check the programming of the trailer control unit

> Obtain a plug connector that adapts the vehicle trailer harness to the trailer electrical plug

> Obtain a brake controller (locally sourced) if the trailer has electric brakes

> Obtain four connectors and one plug housing from the Cayenne connector kit

1. Check the coding of the trailer control unit. First hook up the PIWIS Tester and scan all of the control units. If there are faults in the vehicle electrical control unit, the trailer control unit will not work. Check the nature of the faults, repair and clear the fault memory of that control unit first. Next select the trailer control unit. It should be coded to “USA” and “With detachable trailer hitch” or “Trailer connection device”.

2. Obtain a connector that adapts the vehicle’s trailer harness to the trailer electrical plug. Refer to Parts Information Bulletin Group 9, #D10 "Cayenne Trailer Plug & Adapter" for more information.

3. Obtain a brake controller if the trailer has electric brakes. The plug for the brake controller is prewired into the Cayenne's harness. It is located above the parking brake pedal in 9PA and above the OBDII connector in 92A, 92A, and 95B. Note that the plug may be covered in foam from the factory.

See Figures 1 and 2.

3.1 Reference the applicable Wiring Diagram when installing a brake controller. Make sure the vehicles electrical connections match that of the brake controller.

3.2 9PA: Fuse F19 (30A) in the right side dashboard fuse panel supplies power to the brake controller.  92A: Fuse F5 (25A) in the right side dashboard fuse panel supplies power to the brake controller. Comes with wires and plug as shown in the first photo. Information shown is for reference only, consult a qualified Porsche technician. Use this information at your own risk.  Not returnable.

3.3 Obtain four connectors and one connector housing from the Cayenne connector kit. Use connectors supplied in our kit. Install the wire connectors on the brake controller wires then install into plug housing. See Figure 3.

3.4 Plug in brake controller into the vehicle’s brake controller connector.

Important Notes:

> Cayenne models up to and including MY'05. The maximum output for the trailer lights is 50 watts.

> MY'06 and higher models have a maximum output of 100 watts.

> MY'08 (mid year and up) have the capability of utilizing LED trailer light technology.

> All control units are backwards compatible, meaning the newest control unit is compatible with the oldest vehicle.

> If you are installing a hitch kit, the trailer hitch mounting bolts must be re-torqued after the first 300 miles of operation.

Comes with wires and plug as shown in the first photo. Information shown is for reference only, consult a qualified Porsche technician. Use this information at your own risk.  Not returnable.

★★★★★ ★★★★★
5/5 Stars out of 4 Reviews
1
0
2
0
3
0
4
0
5
4
Trailer Brake Controller adapter
(CA) | March 7th, 2023
Other "instructions" report to easily connect the (previously cut) bare wires to the brake controller. Ok, how does one assure that the wires are connected (from the Porsche's plug/outlet) correctly to the Controller? Is the PK955 adapter the same shape/configuration as the inlet plug that is on the Controller? That way one would run a wire from the same location on both ends, otherwise they could be mismatched (resulting in a blown fuse or burnt adapter, etc.). The wire colors could be different between the controller & the Porsche's outlet....and the outlet being so short & tucked up under dash one can hardly see the outlet let alone the wire colors. How to ensure it is wired correctly?
2012 Cayenne Hybrid
(Colorado) | June 27th, 2021
Called Suncoast for advise but they don’t have installation notes. So here it is: plug the 2 cables (4 plugs) into the receptacle and cut the wires at same length. Strip the ends and connect to your controlled using wire nuts. Pretty easy to install in the vehicle as well.
Mr Warner
(Havelock,m NC) | November 8th, 2016
The adapter parts worked just right. I now have a brake controller in my Cayenne.
2016 Cayenne GTS trailer brake controller
(Chesapeake, VA) | July 6th, 2016
Easy to install, the factory plug is hidden, but easy to find with removal of the trim panel. With this adapter, it was straight up plug and play with a Tekonsha P3 controller.
 

Review this Item

Trailer Brake Controller Adapter
Click the stars to rate. 5 stars is the best.
All fields are required except "where you're from".
Your email is for verification purposes only and will NOT be published or shared. See our Privacy Policy. Thank you for your review!

Enter only the red text:  3Ry1431478Arq!